Product |
Description |
#C-0078
------
Qty:1
Retails:$3.95+
   |
11in Parts Brush,
Wood Handle
Plastic bristles,Contoured hardwood handle. Ideal for
cleaning auto and industrial parts. 11" overall length.
|
#C-0079
------
Qty:1
$9.95
|
4
pc Tune-Up Kit
Drop-forged, Chrome Plated. Flex Ratchet. 3" Extension
Bar. 5/8" Spark Plug Socket. 13/16" Spark Plug Socket |
#C-0080
------
Qty:1
$28.95
|
7
pc Brake Tool Kit
Adjusting tools for most types of rear and front brakes.
Includes: 1/4" x 1/3" and 5/16" x 3/8" offset
box end wrenches
8mm x 10mm box end wrench with 90 degree bend for easy access to most
bleeder fittings
tool for removing and replacing retaining spring caps
and an adjusting tool for servicing Bendix type self adjusting brake
springs. |
#C-0081
------
Qty:1
$99.95
|
Full-Coverage
Disconnect Tool set
Full-Coverage Disconnect Tool set
> Tools Included Service Many Types Of Quick-Disconnect
Fittings Used On General Motors,Ford And Chrysler Vehicles.
> Tools Service Heater Hoses, Transmission Oil Coolers,
Air Conditioning And Fuel Lines+
> Item Numbers 216-2, 216-3, 216-4, 216-5, 21601 and 21602
Are Used On Ford Air Conditioning And Fuel Lines.
> They Are Spingloaded In The Closed Position To Deflect
Any Spray That Occurs When The Line Is Disconnected.
|
#C-0082
------
Qty:1
$6.95
|
In-Line
Ignition Spark Tester
Chrome Plated Shaft for Durability. Black Flexible
Plastic connector Hose for Easy Connection to Spark Plug. Transparent
Test Light Housing Protects Bulb. Easily Replaceable Test Bulb. Tests
for Proper Spark & Continuity of Ignition Circuit to a specific
Plug. |
#C-0083
------
Qty:1
$51.95
|
Piston
Ring Compressor Set
Use the pliers with any band to install pistons from
2-7/8" to 4-3/8" (73 to 11mm) in diameter. Self-locking
ratchet allows you to compress rings by minute graduation. Pliers
can be used vertically or horizontally.
BAND SIZES:
* 2-7/8 to 3-1/8" (73 - 79mm)
* 3-1/8 to 3-3/8" (79 - 86mm)
* 3-3/8 to 3-5/8" (86 - 92mm)
* 3-5/8 to 3-7/8" (92 - 98mm)
* 3-7/8 to 4-1/8" (98 - 105mm)
* 4-1/8 to 4-3/8" (105 - 111mm)
|
#C-0084
------
Qty:1
$7.95
|
Spark
Plug Remover & Installer
Flexible shaft permits access form many angles. Easily
insert & remove hard-to-reach spark plugs with the flexible shaft
tool. Soft-stepped tip firmly grips terminal and porcelain. Tool helps
you avoid hot engine burns. |
#C-0085
------
Qty:1
$12.95
|
Stethoscope
Find bumps and squeaks from the engine to the dashboard.
Identify piston slap, worn gears, faulty valves, water pump failure,
damaged gaskets, defective bearings, and more. Handle is shockproof.
2-piece probe reaches 11-3/4". |
#C-0086
------
Qty:1
$15.95
|
Windshield
Removing Tool
Cable action makes cutting out windshields fast and
easy. The easiest and most proven method of removing windshield. A
strong tempered steel blade, sharpened to a fine cutting edge, with
a large durable aluminum handle, combined with a steel cable pull
handle assures the easiest and fastest way of cutting the caulking
compound around the windshield. The steel cutting blade can be resharpened
and after many uses is easily replaced with a new blade.
|
Product |
Description |
#C-0196
------
Qty:1
$59.95
|
Engine
Sling
Balancing heavy awkward loads can be a one-man job
with this heavy duty load leveler.
Simply turn the crank until the load is balanced at the proper angle.
Saves time and money.
Steel frame is 20-3/4" long. |
Product |
Description |
#C-0488
------
Qty:1
$9.99
|
2000Lb Trailer Hitch Ball (1-7/8in x
3/4in)
Drop Forged Carbon Steel Construction. Chrome Plated
for Durability. Precision-Machined Bolt. Complete with Lock Washer
and Hex Nut. Fits Standard Ball and Socket Couplers. Hitch Ball Sizes
and Pulling Capacities: ITEM # Sizes Pulling Capacity 1-7/8"
Ball x 3/4" Bolt Size** 2000LBS |
#C-0489
------
Qty:1
$34.99
|
2in x 2in A-Fram Trailer Coupler / 5000
Lbs
Drop Forged , Heat Treated Flanged Steel Construction.
Sturdy, Riveted Tongue Lock With Spring Release.
Use With Industrial, Commercial, Utility Agricultural, and Recreational
Equipment.
Size : 2" x 2" , 5000 Lbs. |
#C-0490
------
Qty:1
$9.99
|
5000Lb Trailer Hitch Ball (2 in. x 1
In.)
Drop Forged Carbon Steel Construction. Chrome Plated
for Durability. Precision-Machined Bolt. Complete with Lock Washer
and Hex Nut. Fits Standard Ball and Socket Couplers. Hitch Ball Sizes
and Pulling Capacities: ITEM # Sizes Pulling Capacity 2" Ball
x 1" Bolt Size** 5000LBS |
#C-0491
------
Qty:1
$13.99
|
5000Lb Trailer
Hitch Ball (2-5/16 In. x 1 In.)
Drop Forged Carbon Steel Construction. Chrome Plated
for Durability. Precision-Machined Bolt. Complete with Lock Washer
and Hex Nut. Fits Standard Ball and Socket Couplers. Hitch Ball Sizes
and Pulling Capacities: ITEM # Sizes Pulling Capacity 2-5/16"
Ball x 1" Bolt Size** 5000LBS |
#C-0492
------
Qty:1
$13.99
|
Trailer Coupler
Drop Forger , Heat Treated
Flanged Steel Construction.
Sturdy, Riveted Tongue Lock With Spring Release.
Use With Industrial, Commercial, Utility Agricultural, and Recreational
Equipment. |
Product |
Description |
#C-0813
------
Qty:1
$24.99
|
Universal
Lockout Tool Set
Contents:
1pc slide lock tool
2pc plastic wedges
2 pc thin steel bar, wide bar
1pc Wonder Tool
1pc Plastic Coat Hanger
1pc Wire form "S" hook
1 pc Slide Lock Tool
1 pc Gas Lock Tool |
Product |
Description |
#C-0673
------
Qty:1
$9.99
|
12in Ball Joint Separator
Drop forged carbon steel, heat treated for long life.
Knurled handle for a secure grip.
Tapered wedge has a 1" opening
Slides between ball joint and steering knuckle in most cars and
trucks.
|
#C-0674
------
Qty:1
$11.99
|
16in
Tie Rod Separator
Carbon steel, heat treated and zinc plated.
Tapered wedge has a 21/32" opening.
|
Product |
Description |
#C-0723
------
Qty:1
$9.99
|
110-460V
Voltage Tester
Multi-voltage 4-way current tester.
Test both AC and DC
4 voltage settings 110-220-277-460 volts.
Circuit tester checks for current, DC polarity, frequency and polyphone
line.
Tests outlets, switched, fuses, spark plugs and condensers.
|
#C-0724
------
Qty:1
$35.99
|
Clamp Multimeter
>Measures current, voltage & resistance with
this
durable multimeter overland protection.
>Withstands voltage of 250V AC for 1 minute.
>Conductor Size: 33mm max.
>Frequency: 50/60Hz.
>Jaw opens to 2".
>AC current:6/15/60/150/300a+/-5%
>AC voltage:150/300/600V+/-5%
>DC voltage:60V+/-5%
>Resistance:0~1K ohm/ 10K ohm+/-5%
|
#C-0725
------
Qty:1
$29.99
|
Digital
Multimeter
TECHNICAL SPECIFICATIONS:
RANGE RESOLUTION ACCURACY
1. DC Voltage: 200mV 100uV +/-0.25% of rdg +/-2D
2000mV 1mV +/-0.5% of rdg +/-2D
20V 10mV +/-0.5% of rdg +/-2D
200V 100mV +/-0.5% of rdg +/-2D
1000V 1V +/-0.5% of rdg +/-2D
OVERLOAD PROTECTION: 220Vrms AC for200mV range & 1000V DC or
750Vrms AC for other ranges.
2. AC Voltage: 200V 100mV +/-1.2% of rdg +/-10D
750V 1V +/-1.2% of rdg +/-10D
OVERLOAD PROTECTION: 1000V DC or 750Vrms AC for other ranges.
RESPONSE: Average responding, calibrated in rms of a sine wave.
FREQUENCY RANGE: 45Hz - 450Hz.
3. DC Current: 200uA 100nA +/-1% of rdg +/-2D
2000uA 1uA +/-1% of rdg +/-2D
20mA 10uA +/-1% of rdg +/-2D
200mA 100uA +/-1.2% of rdg +/-2D
10A 10mA +/-2% of rdg +/-2D
OVERLOAD PROTECTION: 200mA 250V fuse (10A range unfused).
MEASURING VOLTAGE DROP: 200mV.
4. Resistance: 200ohm 100m ohm +/-0.8% of rdg +/-2D
2000ohm 1 ohm +/-0.8% of rdg +/-2D
20k ohm 10 ohm +/-0.8% of rdg +/-2D
200k ohm 100 ohm +/-0.8% of rdg +/-2D
2000k ohm 1k ohm +/-1.0% of rdg +/-2D
MAXIMUM OPEN CIRCUIT VOLTAGE: 2.8V.
OVERLOAD PROTECTION: 15 seconds maximum 220Vrms on all ranges.
5. AUDIBLE CONTINUITY: Built in buzzer sounds if
resistance is less then 100ohm.
OVERLOAD PROTECTION: 15 seconds maximum 220Vrms Sounds alarm.
6. TEMPERATURE (K TYPE PROBE)
RANGE: -20 Deg C. to 1370 Deg C.
RESOLUTION: 1 Deg C.
ACCURACY: +/-3 Deg. +/-2D(up to 150 Deg. C.)
+/-3% of rdg(over 150 Deg. C.)
OVERLOAD PROTECTION: 220Vrms AC.
AC Current: 10A
Ohmeter: 200-20m ohm
Tester Transistor Diode
|
#C-0726
------
Qty:1
$9.99
|
Electrician's
Circuit Tester (6-12V)
Alligator clip.
Light in handle glows when circuit connection is complete.
Steel tip complete w/PVC cover.
Helps find broken and live wires.
Tests fuses, light sockets and locates short circuits.
Ideal for autos, trucks, motorcycles, boats and small engines.
6-12V.
|
Product |
Description |
#C-0808
------
Qty:1
$13.99
|
14 In. Lug Wrench
Drop forged from best carbon steel.
Heat treated, well machined,chrome plated.
14" 6 Piont Metric lug wrench 17-19-21-23mm. |
#C-0809
------
Qty:1
$19.99
|
25in Truck Lug
Wrench
Drop forged hardened and tempered steel blade.
Polished and chrome plated.
Cross -design provides extra leverage and torque.
25" 6 point S.A.E sizes: 11/16", 3/4', 13/16", 7/8".
Precisely machined sockets
Chrome plated |
|
